Track & Trace
Filled, closed cartons should be marked on two sides.
The products are transported aligned to our unit by an upstream conveyor technique. The responsibility for the transfer to our system bears the customer.
We point out that the accuracy of the feed has an essential impact on the positioning accuracy of coding and labeling. At the labeling station the carton is then clamped by a top conveyor so that it is fixed. A coding by Bluhm XB4JET, either on the right hand and /or left hand in running direction. The content is then examined by one or two cameras. The data handling and evaluation is arranged by a pharmaceutical control software that is provided by the customer. When the coding is terminated, the labeling is arranged. The Tamper Evident labeler blows a label laterally onto the product respectively right hand and lefthand in running direction. The applicators of the labeler can be adjusted in height and diagonally to conveying direction so that the customer is able to select at which point of the product the label should stick. After the labeling, optional a light barrier can be installed that detects if the label is at the package. After this optional check, a two-sided gate plate follows that rubs the label by 90 Â°. Optionally there will follow a two-sided light barrier that controls the turning around.
When selecting the option-kit “Label check/rejection” after testing the products that are not in order are rejected. In this, the boxes are pushed through air jets in a lockable collecting container. The products that are in order run straight ahead on the conveying technique and can be transferred to the customer’s technique. The products that are not in order of the coding are also rejected.
|Width (diagonally to conveying direction):|
|max:||180mm (240mm with restrictions)|
|Length (in conveying direction):|
|Label roll outside diameter|
|Label roll core diameter: 76.2mm|
|Label gap:||min: 3mm|